Lot release prices on a multi-lot construction loan
Your lender wants more than a lot's share of the loan when that lot sells. Here is how release prices work, how to schedule them and how to record them so each house's numbers stay honest.
Short answer: A release price is the amount your lender requires to take its lien off one lot or house when it sells. On a multi-lot loan it is usually set above that lot's share of the loan, so the loan is paid off before the last lots sell. It is a loan payment, not a cost of the house.
Want a release schedule that matches your lender's statement? Our team keeps it every month. Request a Relationship Assessment.
What a release price is
The OCC's Comptroller's Handbook on commercial real estate lending defines a release price as the loan repayment required to get a partial or full release of the lien on the collateral. On a loan that covers several lots or houses, the bank typically wants to be fully repaid before every unit is sold, so the release price is set at a multiple of each unit's share of the debt. The handbook calls this acceleration.
The handbook's own example: a bank lends $1.5 million against 100 lots and wants to be repaid by the time 80 lots sell. Each lot carries $15,000 of debt, and the release price is 125 percent of that, or $18,750. If the bank wants repayment after 75 lots, the multiple rises to about 134 percent, or $20,100 a lot. When lots differ in value, the bank can set a separate release price for each one.
The three common structures
| Structure | How the release price is set | What to watch |
|---|---|---|
| Multiple of allocated loan | Each lot's share of the loan times a factor above 100 percent | Each step in the factor changes how many sales it takes to retire the loan |
| Percent of sale price | A set share of each lot's gross sale price | A discounted sale sends less to the lender, so some loans add a minimum |
| Fixed schedule | A dollar amount per lot agreed up front | Common when lots differ a lot in value; premium lots are often priced higher |
Lender and broker write-ups describe multiples of roughly 110 to 135 percent of the allocated loan as typical, and some loans use a share of the sale price instead. Your loan agreement controls, not any typical range, so read the release section before you build anything.
Why it matters in your books
- Each house's share of the loan stops matching what you pay. Early sales pay down more than their share. Later lots carry less, and the last one or two may carry none.
- Cash at closing is lower on early sales. If you plan cash as sale price less closing costs less "that lot's loan," you will overestimate what lands in the bank on the first sales.
- Margin per house should not move. The release price pays principal, plus any interest and fees due at payoff. Principal reduces the loan, so it never belongs in cost of sales. Booking the whole payoff as a cost understates margin on early houses and overstates it on the last ones.
Build a release schedule from the loan agreement
Keep one schedule per loan, next to the lender's statement. List every lot or house with its allocated loan amount, its release price, the date it sold, what was actually paid, and the loan balance after each release. Update it after every closing and every draw, because new draws raise the balance the remaining releases must cover.
SAMPLE (made-up numbers, ignoring interest and new draws): a $1,200,000 loan covers 8 houses, so each carries $150,000. The release price is 120 percent, or $180,000.
| Sale | Allocated loan | Paid at closing | Loan balance after |
|---|---|---|---|
| Start | $1,200,000 | ||
| Houses 1 to 6 | $150,000 each | $180,000 each | $120,000 after house 6 |
| House 7 | $150,000 | $120,000 (pays off the loan) | $0 |
| House 8 | $150,000 | $0 | $0 |
The first six closings each send $30,000 more to the lender than the house's share. Houses 7 and 8 send much less. If your books track the loan by house, they need a rule for that $30,000, or the last houses show a loan balance that the lender says is already paid.
Recording a release payment in QuickBooks Online
- Start from the settlement statement, not the wire. The payoff line to the lender is the release payment. Map the rest of the sale the way we describe in recording a spec home sale.
- Split the payoff. Principal goes to the construction loan liability. Accrued interest and any release or reconveyance fee go to the accounts your CPA has set for them, since whether interest is capitalized to the house is a policy question for your CPA.
- Mirror how the lender applies the excess. Ask whether the lender keeps one balance or applies the extra to specific lots. If it keeps one balance, keep one loan account in QuickBooks Online and track the allocation in the schedule. If you use a loan sub-account per house, apply the excess the same way the lender's statement does.
- Reconcile monthly. The loan account in QuickBooks Online should equal the lender's statement balance at month end, and the schedule should tie to both.
Plan cash around it
For each house left to sell, estimate net cash as sale price less commissions and closing costs less the release price. Put those numbers in your 13-week cash forecast. The OCC handbook notes that a development with thin margins on each unit has trouble paying off on an accelerated basis, which is exactly the risk this forecast shows early.
What to check in the loan terms
- The multiple or percentage, and whether it changes by phase.
- Any minimum release price or minimum number of releases per period.
- Whether lots must release in a set order.
- Whether part of each release repays shared costs such as roads or amenities. The OCC handbook says banks often apply part of unit release prices to the debt for common improvements.
- How long the lender takes to issue a release, so your buyer's closing is not left waiting.
The loan agreement is a legal document. Ask your attorney and lender what it means, and use this page for how it shows up in your books.
Mistakes we see
- Booking the whole lender payoff as cost of the house.
- Relieving a house's loan sub-account to zero and pushing the rest negative, instead of following the lender's application.
- Leaving release and reconveyance fees inside the principal line.
- Not updating the schedule after a loan modification or a new phase.
For how a per-house loan and a revolving line differ, see builder line of credit vs construction loan. For draws, see the construction loan draw process.
How we help
Our team keeps the release schedule for each multi-lot loan, records every payoff from the settlement statement and reconciles the loan to your lender's statement each month. Our founder reviews every close. We quote a flat monthly price for each builder, starting at $1,500 a month, with typical engagements between $2,500 and $8,500 a month. Start with a $1,500 Margin Review for written findings. See job costing, construction bookkeeping, pricing or request a Relationship Assessment.
Sources
- OCC, Comptroller's Handbook: Commercial Real Estate Lending (release prices, acceleration and the 100-lot example)
- Damen Capital, Partial Release Clause: How It Works on Land Loans (multiple, percent of sale and fixed schedule structures)
- Willowbrook Capital, Land Development Loans: How release prices and takedowns work
Common questions
What is a lot release price?
The amount your lender requires to remove its lien from one lot or house when it sells. On a multi-lot loan it is usually more than that lot's share of the loan.
Why is my release price higher than my lot's share of the loan?
Lenders set it above the pro rata share so the loan is repaid before all the collateral is sold. The OCC handbook calls this acceleration.
Is the release price a cost of the house?
No. The principal part of the payoff reduces your loan. Only interest and fees, treated the way your CPA sets, are expenses or capitalized costs.
How do I track loan balances by house on a blanket loan?
Keep a release schedule showing each lot's allocated loan, release price and actual payment, and mirror how your lender applies any excess paydown.
What happens to the last lots on the loan?
Because early releases pay down extra, the loan is often retired before the last lots sell, so those lots may close with little or nothing owed to the lender.
Can you track release prices for us?
Yes. Our team keeps the schedule, records each payoff and reconciles the loan to the lender's statement every month.
Related
- Construction loan draw process
- Builder line of credit vs construction loan
- Recording a spec home sale in QuickBooks Online
- Recording a lot purchase in QuickBooks Online
- Spec home accounting
- Construction loan interest reserve
- Glossary: construction loan
- Construction bookkeeping service
By John Mos, Founder. Updated . We do not give tax or legal advice. Please ask your CPA or attorney.
See where your margin goes, house by house.
Tell us about your homes and your books. If we are a fit, we start with a $1,500 Margin Review: written findings and a fixed quote in 10 business days, credited to your onboarding fee if you sign up.